| ♥ 0 |
Hey Pete, I’m in the process of trying to create the moving average crossover alert and I have some questions about the discrepancies between where the chart says I should receive a signal and the alert values indicates I should receive a signal. I added the moving averages on the chart for my own edification. I followed the steps https://www.hahn-tech.com/ans/alert-on-daily-ema-cross-instead-of-intraday/ Also, I only see buy signals. I’m also interested in sell signals. Attachments:
RESOLVED
Marked as spam
|
Posted by |
Private answer
You missed a very important step. You did not adjust the inputs for "length1" and 'length2" to match what you have added to the chart. This means you are using the default values of 15 and 30 instead of 5 and 20. This explains why your signals on the lower subgraph do not match the crossovers on the chart. If you want the signals to display for the cross below instead of the cross above, this again is a setting that you can adjust. The setting is immediately below the place where you adjust the lengths and average types. Go back to that previous post and check the screenshots I provided and you will see that I included instructions to adjust the inputs as needed. Marked as spam
 Posted by Pete Hahn (Questions: 37, Answers: 4086) Answered on June 21, 2020 12:19 pm
|
